Series 500 Precision Patient Simulators

A new series of patient simulator modules which can be combined in one case to meet your specific needs.

Product Information:

    The Series 500 Patient Simulators feature a modular design concept that allow the customer to tailor an instrument to their specific needs.  The basic module incorporates a 12-Lead ECG Patient Simulator, time base and a power supply.  Available options include Blood Pressure Module, Respiration-Temperature Module, High-Level Output Module, and Variable High-Level Output Module.  The Series 500 Patient Simulator is housed in a rugged high-impact and corrosion-resistant ABS plastic case.  Modifications and other features can easily be added to these simulators due to the modular design concept.   If you have a special application, please contact us.

Features:

• All 12 lead configurations are calibrated
• Provides a complete PQRST waveform at all rates
• ECG and squarewave outputs
• Six preset rates
• Five snap output connectors plus 10 - 3.2mm pin jacks
• Long battery life with low battery indicator

Options:

• 510 ECG, Crystal-controlled Time Base and Power Supply
• 520 Blood Pressure Module (Static and dynamic pressures)
• 540C Respiration-Temperature Module (for 400 and 700 Series thermistor probes)
• E2 High-Level Output
• E3 Variable High-Level Output
• Rechargeable Ni-Cad battery power supply
• ECG Snap Adapters (set of five)

Optional Blood Pressure Module Features and Specifications:

• Eight static pressure levels
• Arterial and pulmonary dynamic outputs
• Dynamic outputs calibrated at all rates
• Six dynamic rates
• Dynamic outputs synchronized with ECG
• Up to three blood pressure channels can be combined in one case
• Bridge Resistance:  350ohms
• Excitation Voltage:  0 - 12 volts, ac or dc
• Output Sensitivity Factor:  5uV/V/mmHg and 40uV/V/mmHg
• Static Simulated Pressures: 5, 10, 15, 20, 50, 100, 150, 200 mmHg, +/-2%
• Dynamic Simulated Pressures:  120/80mmHg Arterial and 25/10mmHg pulmonary, +/-2%
• Dynamic Rates:  60, 75, 100, 120, 150, 200, +/-2% (+/-.1% with Crystal-controlled time base option)
• Output Connector:  5 pin DIN jack

Optional Respiration-Temperature Module Features and Specifications:

• Three impedance variations plus apnea:  0, .2, .5, 2.0 ohms, +/- 2%
• Three respiration rates: 15, 30, 120 BPM, +/-2% (+/-.1% with Crystal-controlled time base option)
• Two base impedance selections:  500, 1000 ohms, +/-2%
• Three temperature levels:  33, 37, 41 degrees C, +/-2%
• Waveform:  Squarewave, output referenced to LA lead (can be referenced to other leads, please specify)
• Output connectors:  2 conductor phone jacks for series 400 Probe, 3 conductor phone jacks for series 700 Probe

Pricing:

All prices are F.O.B.  Lewis Center, Ohio.

Terms:  Net 30 days

Warranty:

    All simulators and function generators are guaranteed to be free from defects in materials and workmanship for a period of one year (excluding batteries).  Seller will repair or replace (at Seller's option) any simulator or generator which proves to be defective with the warranty period.  Permission must be obtained from Seller before returning any instrument.  In no event shall the Seller be liable for consequential or special damages of any kind.  Under no circumstances shall this instrument be used in a life support application.

[ Home ] [ Products ] [ Contact Us ] [ Product Ordering ]